• SAW

  • 2AC450 / Upcut Mitre Saw - 450 mm Saw Blade


Upcut Mitre Saw Machine for pvc aluminium and wood profiles

For aluminum and PVC profiles cutting. The up cut sawing machine can be used for a lot of different pvc and aluminium profiles with different sizes. The machine works with electricity and an air compressor and is designed by Baertec Engineers with an basic plug and easy work system. The machine has an universal language with different symbols on the control panel. A main electricity switch is available with an extra start and stop buttong for the industrial electric motors of Baertec. A clamp query system is also available, it is not possible to start with the cutting process, before you fix the profiles with the automatic clamps on the machine table, which works with an pneumatic system. A phase control unit is available by all Baertec cutting or drilling machines, that will protect you or your worker that the sawblade can turns to the wrong direction by using a wrong cable connection to you electricity infrastructure. Special sensors are monitoring the machine against over heating, in a serious situation the machine will cut the electricity byself to protect you and the machine. A voltage and frequenz monitoring sensor is also protecting the machine agains low and high voltage powers. A double-hand safety system is also available on the cutting machine
Pneumatic sawing feed from below with 450 mm saw blade diameter.
The saw blade feed speed can be adjusted.- Wide angle range from 22,5° to 112,5° with special location points at 22.5°,45°, 90°. Vertical pneumatic clamps ensure optimum profile fixing.
Extraction system
Length stop and measuring systems
Roller conveyors
Saw blades
Cooling system
Technical Features
Power supply: 400 V, 3ph, 50-60 Hz
Power output: 1.5 kW
Spindle speed: 2,800 r.p.m.
Air pressure: 6-8 bar
Air consumption: 15 l/min.
Machine height: 1,280 mm
Machine length: 640 mm
Machine width: 840 mm
Machine weight: 242 kg
VIDEOS 2AC450 / Upcut Mitre Saw - 450 mm Saw Blade